Struct p256::ProjectivePoint

pub struct ProjectivePoint { /* private fields */ }

A point on the secp256r1 curve in projective coordinates.

Implementations

impl ProjectivePoint

pub const IDENTITY: Self = _

Additive identity of the group: the point at infinity.

pub const GENERATOR: Self = _

Base point of P-256.

pub const fn identity() -> ProjectivePoint

👎Deprecated since 0.10.1: use ProjectivePoint::IDENTITY instead

Returns the additive identity of P-256, also known as the “neutral element” or “point at infinity”.

pub fn generator() -> ProjectivePoint

👎Deprecated since 0.10.1: use ProjectivePoint::GENERATOR instead

Returns the base point of P-256.

pub fn to_affine(&self) -> AffinePoint

Returns the affine representation of this point, or None if it is the identity.

pub fn double(&self) -> ProjectivePoint

Doubles this point.

Trait Implementations

impl Add<&AffinePoint> for &ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the + operator.

fn add(self, other: &AffinePoint) -> ProjectivePoint

Performs the + operation.

impl Add<&AffinePoint> for ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the + operator.

fn add(self, other: &AffinePoint) -> ProjectivePoint

Performs the + operation.

impl Add<&ProjectivePoint> for &ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the + operator.

fn add(self, other: &ProjectivePoint) -> ProjectivePoint

Performs the + operation.

impl Add<&ProjectivePoint> for ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the + operator.

fn add(self, other: &ProjectivePoint) -> ProjectivePoint

Performs the + operation.

impl Add<AffinePoint> for ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the + operator.

fn add(self, other: AffinePoint) -> ProjectivePoint

Performs the + operation.

impl Add<ProjectivePoint> for ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the + operator.

fn add(self, other: ProjectivePoint) -> ProjectivePoint

Performs the + operation.

impl AddAssign<&AffinePoint> for ProjectivePoint

fn add_assign(&mut self, rhs: &AffinePoint)

Performs the += operation.

impl AddAssign<&ProjectivePoint> for ProjectivePoint

fn add_assign(&mut self, rhs: &ProjectivePoint)

Performs the += operation.

impl AddAssign<AffinePoint> for ProjectivePoint

fn add_assign(&mut self, rhs: AffinePoint)

Performs the += operation.

impl AddAssign<ProjectivePoint> for ProjectivePoint

fn add_assign(&mut self, rhs: ProjectivePoint)

Performs the += operation.

impl Clone for ProjectivePoint

fn clone(&self) -> ProjectivePoint

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl ConditionallySelectable for ProjectivePoint

fn conditional_select(a: &Self, b: &Self, choice: Choice) -> Self

Select a or b according to choice.

fn conditional_assign(&mut self, other: &Self, choice: Choice)

Conditionally assign other to self, according to choice.

fn conditional_swap(a: &mut Self, b: &mut Self, choice: Choice)

Conditionally swap self and other if choice == 1; otherwise, reassign both unto themselves.

impl ConstantTimeEq for ProjectivePoint

fn ct_eq(&self, other: &Self) -> Choice

Determine if two items are equal.

fn ct_ne(&self, other: &Self) -> Choice

Determine if two items are NOT equal.

impl Curve for ProjectivePoint

type AffineRepr = AffinePoint

The affine representation for this elliptic curve.

fn to_affine(&self) -> AffinePoint

Converts this element into its affine representation.

fn batch_normalize(p: &[Self], q: &mut [Self::AffineRepr])

Converts a batch of projective elements into affine elements. This function will panic if p.len() != q.len().

impl Debug for ProjectivePoint

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ProjectivePoint

fn default() -> Self

Returns the “default value” for a type.

impl From<&AffinePoint> for ProjectivePoint

fn from(p: &AffinePoint) -> Self

Converts to this type from the input type.

impl From<&ProjectivePoint> for AffinePoint

fn from(p: &ProjectivePoint) -> AffinePoint

Converts to this type from the input type.

impl From<&PublicKey<NistP256>> for ProjectivePoint

fn from(public_key: &PublicKey) -> ProjectivePoint

Converts to this type from the input type.

impl From<(FieldElement, FieldElement, FieldElement)> for ProjectivePoint

fn from((x, y, z): ProjectivePoint<FieldElement>) -> ProjectivePoint

Converts to this type from the input type.

impl From<AffinePoint> for ProjectivePoint

fn from(p: AffinePoint) -> Self

Converts to this type from the input type.

impl From<ProjectivePoint> for AffinePoint

fn from(p: ProjectivePoint) -> AffinePoint

Converts to this type from the input type.

impl From<PublicKey<NistP256>> for ProjectivePoint

fn from(public_key: PublicKey) -> ProjectivePoint

Converts to this type from the input type.

impl FromEncodedPoint<NistP256> for ProjectivePoint

fn from_encoded_point(p: &EncodedPoint) -> CtOption<Self>

Deserialize the type this trait is impl’d on from an EncodedPoint.

impl Group for ProjectivePoint

type Scalar = Scalar

Scalars modulo the order of this group’s scalar field.

fn random(rng: impl RngCore) -> Self

Returns an element chosen uniformly at random from the non-identity elements of this group.

fn identity() -> Self

Returns the additive identity, also known as the “neutral element”.

fn generator() -> Self

Returns a fixed generator of the prime-order subgroup.

fn is_identity(&self) -> Choice

Determines if this point is the identity.

fn double(&self) -> Self

Doubles this element.

impl GroupEncoding for ProjectivePoint

type Repr = GenericArray<u8, UInt<UInt<UInt<UInt<UInt<UInt<UTerm, B1>, B0>, B0>, B0>, B0>, B1>>

The encoding of group elements.

fn from_bytes(bytes: &Self::Repr) -> CtOption<Self>

Attempts to deserialize a group element from its encoding.

fn from_bytes_unchecked(bytes: &Self::Repr) -> CtOption<Self>

Attempts to deserialize a group element, not checking if the element is valid.

fn to_bytes(&self) -> Self::Repr

Converts this element into its byte encoding. This may or may not support encoding the identity.

impl LinearCombination for ProjectivePoint

fn lincomb(x: &Self, k: &Self::Scalar, y: &Self, l: &Self::Scalar) -> Self

Calculates x * k + y * l.

impl Mul<&Scalar> for &ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the * operator.

fn mul(self, other: &Scalar) -> ProjectivePoint

Performs the * operation.

impl Mul<&Scalar> for ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the * operator.

fn mul(self, other: &Scalar) -> ProjectivePoint

Performs the * operation.

impl Mul<Scalar> for ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the * operator.

fn mul(self, other: Scalar) -> ProjectivePoint

Performs the * operation.

impl MulAssign<&Scalar> for ProjectivePoint

fn mul_assign(&mut self, rhs: &Scalar)

Performs the *= operation.

impl MulAssign<Scalar> for ProjectivePoint

fn mul_assign(&mut self, rhs: Scalar)

Performs the *= operation.

impl<'a> Neg for &'a ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the - operator.

fn neg(self) -> ProjectivePoint

Performs the unary - operation.

impl Neg for ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the - operator.

fn neg(self) -> ProjectivePoint

Performs the unary - operation.

impl PartialEq<ProjectivePoint> for ProjectivePoint

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PrimeCurve for ProjectivePoint

type Affine = AffinePoint

impl Sub<&AffinePoint> for &ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the - operator.

fn sub(self, other: &AffinePoint) -> ProjectivePoint

Performs the - operation.

impl Sub<&AffinePoint> for ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the - operator.

fn sub(self, other: &AffinePoint) -> ProjectivePoint

Performs the - operation.

impl Sub<&ProjectivePoint> for &ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the - operator.

fn sub(self, other: &ProjectivePoint) -> ProjectivePoint

Performs the - operation.

impl Sub<&ProjectivePoint> for ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the - operator.

fn sub(self, other: &ProjectivePoint) -> ProjectivePoint

Performs the - operation.

impl Sub<AffinePoint> for ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the - operator.

fn sub(self, other: AffinePoint) -> ProjectivePoint

Performs the - operation.

impl Sub<ProjectivePoint> for ProjectivePoint

type Output = ProjectivePoint

The resulting type after applying the - operator.

fn sub(self, other: ProjectivePoint) -> ProjectivePoint

Performs the - operation.

impl SubAssign<&AffinePoint> for ProjectivePoint

fn sub_assign(&mut self, rhs: &AffinePoint)

Performs the -= operation.

impl SubAssign<&ProjectivePoint> for ProjectivePoint

fn sub_assign(&mut self, rhs: &ProjectivePoint)

Performs the -= operation.

impl SubAssign<AffinePoint> for ProjectivePoint

fn sub_assign(&mut self, rhs: AffinePoint)

Performs the -= operation.

impl SubAssign<ProjectivePoint> for ProjectivePoint

fn sub_assign(&mut self, rhs: ProjectivePoint)

Performs the -= operation.

impl<'a> Sum<&'a ProjectivePoint> for ProjectivePoint

fn sum<I: Iterator<Item = &'a ProjectivePoint>>(iter: I) -> Self

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl Sum<ProjectivePoint> for ProjectivePoint

fn sum<I: Iterator<Item = Self>>(iter: I) -> Self

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl ToEncodedPoint<NistP256> for ProjectivePoint

fn to_encoded_point(&self, compress: bool) -> EncodedPoint

Serialize this value as a SEC1 EncodedPoint, optionally applying point compression.

impl TryFrom<&ProjectivePoint> for PublicKey

type Error = Error

The type returned in the event of a conversion error.

fn try_from(point: &ProjectivePoint) -> Result<PublicKey>

Performs the conversion.

impl TryFrom<ProjectivePoint> for PublicKey

type Error = Error

The type returned in the event of a conversion error.

fn try_from(point: ProjectivePoint) -> Result<PublicKey>

Performs the conversion.

impl Copy for ProjectivePoint

impl DefaultIsZeroes for ProjectivePoint

impl Eq for ProjectivePoint

impl PrimeGroup for ProjectivePoint